Game board convenient for our game boxes, 267 x 180 mm; this size allows to put a DinA4 label on each side - the remaining 1 cm per side can be flipped over and allows for a perfect rim

The game boards are made of cardboard with both sides white and a thickness of 2 mm.

You can make this board to a foldable one, when cutting the top coating and part of the middle coating. Then the plan can be folded at this line.

A convinient tool (freeware) for creating game boards is PosteRazor (http://posterazor.sourceforge.net), which enables you to cut large pictures into printable parts including overlapping areas !
 

Halfed game board, foldable, size 390x277 mm open (or 195x277 mm closed), i.e. convenient for our game boxes.

The game board can be customized by using two DinA4 labels. On each open side of the two parts of the board, the labels are 1 cm longer, so that these borders can be folded around the edges.

The game boards are made of cardboard with both sides white and a thickness of 1.9 mm.


A convinient tool (freeware) for creating game boards is PosteRazor (http://posterazor.sourceforge.net), which enables you to cut large pictures into printable parts including overlapping areas
 

Quartered game board, foldable, size 554 x 380 mm open (or 277 x 190 mm closed), i.e. convenient for our game boxes.

The game board can be customized by using four DinA4 labels. On each open side of the four parts of the board, the labels are 1 cm longer, so that these borders can be folded around the edges.

The game boards are made of cardboard with both sides white and a thickness of 1.9 mm.

A convinient tool (freeware) for creating game boards is PosteRazor (http://posterazor.sourceforge.net), which enables you to cut large pictures into printable parts including overlapping areas
 

Double-sided game board with imprint squares on one side and hexagons on the other side as well as a winning point track (0-50), 400x400 mm, foldable, 4 parts

Details :

- square game board : field size 28x28mm, 13 x 13 fields
- hexagon game board : 23mm baseline, 10x9 fields
 

Counting counter / Point counter, set of 4 pieces in red, yellow, green, blue; counting area minus 8 to plus 8

Size 93 x 52 mm, convinient for cubes 8 or 10 mm
 

Foam rubber game board; easy to cut into the needed size; can be used as base / pad for printed paper - results in a solid and presentable game board in a customized size

Size 300 x 450 x 4 mm, in red, yellow, green, blue, white
 

We can produce your own game boards; in the following a few samples (more on request):

2mm cardboard, finished with coloured paper (real game board), please choose your size :

- up to 42 x 29,7 cm
- up to 29,7 x 21 cm
- up to 21 x 13,5 cm


Sizes inbetween are possible. Price already includes a one-time preparation fee.

Use JPG, TIF or PDF. Front side has to be 3cm bigger, backside 1cm - this is needed for production.

Boards can be one piece or folded (+ 0,50 EUR per piece)
 

Chessex Battlemat size 66 cm x 60 cm (26" x 23½"), pre-printed with 1" Squares and 1' Hexes, made from expanded vinyl, colour cream

To be used with water-based markers to be reversible.
 

Game Boards in various sizes, flexible material
Game boards are printed on flexible material (similar to a mouse pad, but a bit more flexible), 600g/qm. High-quality printing, high resolution graphics, pictures and text is possible. Boards will be water-resistant. We only need a PDF, JPG, TIF file.
Price per centimeter is 0,70 EUR, based on a max. width of 65 cm.
Calculation: You have a board size of 30 x 20 cm. This size allows to be printed twice (2 x 30 cm = 60 cm) on the roll (65 cm). Thus the price is 20 cm x 0,70 EUR = 14 EUR, thus 7 EUR per board.
Attention: Minimum volume is 150 EUR !!! Customized game boards can not be given back!
 

Game board with hex fields

Board is 39,5 cm x 55 cm (this side folded). Hex-Fields are 1 cm (thus 6 x 1 cm)